![MG reveals next generation EVs; Marvel R Electric crossover set for May 2022 European launch [Updated]](https://images.squarespace-cdn.com/content/v1/5237a580e4b09510ca448d5e/1616130245828-TXLCWX6IUS3R1X19WNNT/MG_MARVEL_R_03.jpg)
MG reveals next generation EVs; Marvel R Electric crossover set for May 2022 European launch [Updated]
MG Motor has pulled the covers off its Marvel R Electric SUV this week. Self-described by the company as “a high-tech, luxurious ‘lifestyle’ SUV for the C-segment”, the Marvel R Electric is essentially an export-version carbon copy of sister SAIC brand Roewe’s Marvel R.
MG Marvel R features tri-motor design, 400km WLTP range with vehicle-to-load technology
MG Marvel R Electric [updated]
[Update] Speaking with Tim Robson, PR and Communications Manager for MG Motor Australia EV Brief was told "We're excited to see what MG Motor Europe has shown with the Marvel R, and we reckon Australians would love its performance, technology and styling. However, it's not on the cards for Australia at the moment."
MG Motor has pulled the covers off its Marvel R Electric SUV this week. Self-described by the company as “a high-tech, luxurious ‘lifestyle’ SUV for the C-segment”, the Marvel R Electric is essentially an export-version carbon copy of sister SAIC brand Roewe’s Marvel R.
This “R” sub-brand was conceived to promote higher-end vehicles of a sportier design aesthetic, and these cars are marketed though a stand-alone dealer network in China.
The MG Marvel R Electric does indeed appear to be high-tech, with a tri-motor drivetrain (albeit with “only” 212 kW (288 PS). One can only assume that MG Motor has chosen a three motor setup—one of the front axel and two on the rear—so as to integrate smaller, more compact and efficient motor designs into its BEVs. The company has not provided a curb weight figure however.
The Marvel R Electric boasts a peak torque figure of 665 Nm, (490 lb ft) and a claimed 0-100 km/h (0-62 mph) time of 4.9 seconds. According to MG Motor’s press release, a rear-wheel-drive variant will also be available; presumably with a two-motor setup to accommodate a front trunk.
At 4,674 mm long with a 2,800mm wheelbase, 1,919 mm wide and 1,618 mm tall, The Marvel R Electric is slightly longer, and wider than Volkswagen’s ID.4 (4,585 mm long, 2,765 mm wheelbase, 1,852 mm width, 1,636 height)
The Marvel R Electric has a pleasingly contemporary appearance; one that is far removed from the traditional-yet-handsome ZS EV. Wide front and rear LED light strips—de rigueur these days it seems—dominate the design, and pleasing surface creases and aggressive vents give the Marvel R Electric some street appeal.
The interior is also a step up from the ZS EV, with soft touch materials across the doors and dashboard, metal-finish switchgear, a full LCD driver’s display measuring 12.3 inches and large vertically-mounted touchscreen of almost 20 inches—a la Tesla Model X and Mustang Mach-E—dominating the console.
MG Marvel R Electric provisional specifications
Tri-Motor 212 kW / 665 Nm*
All-Wheel Drive (Tri-motor)
>400 km WLTP range*
1.8 sec (0-50 km/h acceleration)*
4.9 sec (0-100 km/h acceleration)*
200 km/h (top speed)*
11 kW AC Charger (3-phase fast charging)
30 min to 80% battery level fast-charging capacity
750 kg towing capacity*
Digital cockpit with 19.4” floating screen
MG Pilot – advanced driver assistance systems (ADAS)
Climate control with heat pump
V2L 2,500W power supply for external usage
Battery technology
MG Motor claims a WLTP range of over 400 kilometres, and although battery specifications haven’t been provided, it’s safe to assume that the MG will share Roewe’s 69.9 kWh gross battery capacity. There’s also 11kW AC charging on board, and DC charging that can achieve 80% SoC in 30 minutes. MG hasn’t provided a DC charging rate, but from the above figure we can assume it will be around 100-120kW.
The MG Marvel R Electric is expected to launch in Europe from May 2021. We have contacted MG Motor Australia about possible availability, and will update with their response.
The SAIC Roewe Marvel-R, on which the MG Marvel R is based. Image: Forma car News
The MG5 Electric wagon
MG5 Electric Wagon
Also not to be missed, was MG’s announcement of a facelift for its MG5 electric station wagon (or estate, or touring depending on where you reside).
This update brings a fresher face to the current version’s plain styling. Don’t dismiss the MG5 purely on aesthetic grounds however. A practical, spacious wagon with 578l trunk space priced from £24,495 (after Plug In Car Grant) helped the brand to strong UK sales in 2020 despite the COVID-19 pandemic.
The MG5 offers a similar 400 kilometre WLTP range to the Marvel R, and features a single drive motor with 135 kW (184 ps) and 280 Nm of torque. 11kW AC charging and high-speed DC charging are standard.
We can expect to see the MG5 Electric hitting the streets of Europe in October 2021.
MG5 Electric provisional specifications
World’s first electric station wagon
>400 km (WLTP range)*
578L (trunk volume)
1,456L trunk volume max
135 kW / 280 Nm electric motor*
3.4 sec (0-50 km/h acceleration)*
8.3 sec (0-100 km/h acceleration)*
11 kW AC Charger (3-phase fast charging)
30 min to 80% battery level fast-charging capacity
500 kg towing capacity*
75 kg roof load*
MG Pilot – advanced driver assistance systems (ADAS)
V2L 2,500W power supply for external usage
Hyundai Ioniq 5 debuts today: Watch the livestream world premiere here!
The IONIQ 5 world premiere livestream will start on 23/2/21 at 6:00PM AEST, 8:00AM CEST and on 22/2/21 at 11:00PM PT
We’ve covered Hyunidai’s IONIQ 5 rather frequently, as this new electric vehicle based on the E-GMP platform is set to be an important vehicle for the South Korean automaker.
The IONIQ 5 world premiere livestream will start on 23/2/21 at 6:00PM AEST, 8:00AM CEST and on 22/2/21 at 11:00PM PT
We’ve covered Hyunidai’s IONIQ 5 rather frequently, as this new electric vehicle based on the E-GMP platform is set to be an important vehicle for the South Korean automaker.
The IONIQ 5 is expected to feature a 450 kilometre (280 mile) WLTP rated range from a 58kW hour battery, with an option for a 73kWh battery with a 550 kilometre (340 mile) range. With two motors, the all-wheel drive setup should scoot the IONIQ 5 to 100km/h (62mph) in 5.2 seconds courtesy of 230kW (313 PS) between the wheels.
Twitter has already allegedly sprung the final exterior design on the IONIQ 5, with users @macheauto and @seb68 sharing what look to be a number of press images in the below thread:
Final prototypes have been spotted out gathering data in Australian cities over the last couple of months, and it’s expected that Australia will be an important market for Hyundai’s new IONIQ brand, as well as for its new Kona Electric which is set to launch in March 2021.
Hyundai is promising ideal weight distribution, a modular flexible interior and V2X functionality, with the ability to power computers, tools or camping equipment from build in power outlets.
We’re genuinely big fans of the IONIQ 5’s sharp design, and if the Kona Electric is anything to go by, Hyundai will continue to improve its EV offerings with the IONIQ 5 by increasing battery range, refinement, energy efficiency and luxury.
Hyundai's New 'E-GMP' Platform to Underpin Future BEVs
Designed exclusively for electric vehicles, the E-GMP platform architecture marks an engineering step change from Hyundai. With the company’s current range of EVs based on platforms designed for internal combustion engines, The E-GMP platform provides increased development flexibility, powerful driving performance, increased driving range, strengthened safety features, and more interior space for occupants and luggage according to Hyundai.
Designed exclusively for electric vehicles, the E-GMP platform architecture marks an engineering step change from Hyundai. With the company’s current range of EVs based on platforms designed for internal combustion engines, The E-GMP platform provides increased development flexibility, powerful driving performance, increased driving range, strengthened safety features, and more interior space for occupants and luggage according to Hyundai.
During an online digital discovery event, Albert Biermann, President and Head of R&D Division for Hyundai Motor Group. stated “Today our front-wheel driven Hyundai and Kia BEVs are already among the most efficient ones in their segments. With our rear-wheel driven based E-GMP, we are extending our technological leadership into segments where customers demand excellent driving dynamics and outstanding efficiency.”
According to Hyundai, E-GMP reduces complexity through modularisation and standardisation, allowing rapid and flexible development of products which can be used across most vehicle segments, such as sedans, SUVs and CUVs.
Hyundai claims that future vehicles based on E-GMP architecture can provide range over 500km on a full charge (WLTP) and be charged up to 80% within 18 minutes through high-speed DC charging.
E-GMP will be based on an 800V system architecture, while also allowing 400V charging. The company claims a world first for this multi-charging system, which operates the motor and the inverter to boost 400V to 800V for stable charging compatibility.
Hyundai plans to showcase a flexible charging system through its Integrated Charging Control Unit (ICCU). This unit allows bidirectional charging, and enables a new vehicle-to-load (V2L) function up to 3.5kW, which can additionally discharge energy from the vehicle battery without additional components. Hyundai claims this enables any BEV based on the E-GMP to operate other electric machinery, charge another EV, or operate “a mid-sized air conditioner unit and a 55-inch television for up to 24 hours.”
You can read the full press release below:
2 December, 2020 – Hyundai Motor Group has unveiled its new Electric-Global Modular Platform (E-GMP), a dedicated Battery Electric Vehicle (BEV) platform. Revealed online today during an ‘E-GMP Digital Discovery’ event, the platform will serve as the core technology for Hyundai Motor Group’s next-generation BEV line-up.
The event was broadcasted through the Group’s official YouTube channel and Channel Hyundai, an online global content platform.
From 2021, the E-GMP will underpin a range of dedicated new BEVs, including Hyundai Motor Company’s IONIQ 5; Kia Motors Corporation’s first dedicated BEV to be revealed in 2021; and a series of other models.
Designed exclusively for BEVs, E-GMP provides various advantages compared to the Group’s existing platforms, which have each been engineered predominantly to accommodate internal combustion engines. Benefits include increased development flexibility, powerful driving performance, increased driving range, strengthened safety features, and more interior space for occupants and luggage.
“Today our front-wheel driven Hyundai and Kia BEVs are already among the most efficient ones in their segments,” said Albert Biermann, President and Head of R&D Division for Hyundai Motor Group.
“With our rear-wheel driven based E-GMP, we are extending our technological leadership into segments where customers demand excellent driving dynamics and outstanding efficiency.”
“E-GMP is the culmination of years of research and development and brings together our most cutting-edge technologies. Our BEV line-up will evolve and be strengthened by this innovative new platform,” said Fayez Abdul Rahman, Senior Vice President of Vehicle Architecture Development Center for Hyundai Motor Group.
Maximising development flexibility through modularisation and standardisation
E-GMP reduces complexity through modularisation and standardisation, allowing rapid and flexible development of products which can be used across most vehicle segments, such as sedans, SUVs and CUVs. Moreover, flexible development can satisfy various customer needs for vehicle performance. Among these, a high performance model will accelerate from 0 to 100kph in less than 3.5 seconds and achieve a maximum speed of 260km/h.
E-GMP will be highly effective in expanding the Group’s EV leadership position as it will enable the company to enlarge its EV line-up over a relatively short period through modularisation and standardisation.
Designed for Driving Performance, Safety and Maximised Space
E-GMP is engineered to offer improved cornering performance and driving stability at high speed. This is due to optimal weight distribution between front and rear, a design which enables a low centre of gravity thanks to its low-mounted battery pack, and the adoption of electric motors located in the space previously occupied by an engine.
The high-speed electric motor raises the driving performance of E-GMP vehicles. A five-link rear suspension system, which is typically used for mid and large sized vehicle segments, and the world’s first integrated drive axle (IDA), which combines wheel bearings with the drive shaft to transmit power to the wheels, enhance ride comfort and handling stability.
The platform secures battery safety through a battery support structure made of ultra-high strength steel. Hot-stamped steel components surround this structure for additional rigidity. Collision energy can be absorbed efficiently thanks to energy-absorbent sections of the body and chassis, effective energy load paths, and a central section of the battery pack tightly bound to the vehicle body.
Moreover, by strengthening the structure of the load support section, located in front of the dashboard, engineers have been able to minimise collision energy to the power electric system and battery. The A-pillar’s load distribution structure also prevents deformation of the passenger cell.
E-GMP maximises interior space through its long wheelbase, short front and rear overhangs and slim cockpit module. With the battery pack mounted beneath the floor, the E-GMP creates a flat floor for the cabin. This provides more legroom for passengers, while enabling various arrangements for the front and rear seats.
The battery pack itself - mounted between the front and rear wheel axles - will be the most power-dense system that Hyundai Motor Group has ever created. This is partly thanks to its enhanced cooling performance, a result of a new separate cooling block structure which helps make the battery pack more compact. With energy density enhanced by around 10% compared to existing EV battery technology, the battery packs are lighter, can be mounted lower in the body, and liberate more cabin space.
Efficient and Powerful Electrification System
The E-GMP’s compact new power electric (PE) system consists of a powerful motor, EV transmission and inverter. These three components are integrated into a single compact module. This ensures powerful performance by raising the motor’s maximum speed by up to 70% compared to existing motors. The high-speed motor is smaller than other motors while providing comparable performance, and it gives efficiencies in both space and weight.
Additionally, a standardised battery system can be tuned to offer performance appropriate for a specific vehicle segment, to maximise driving range, or to meet various customer needs.
The motor is controlled by the inverter power module, which adopts silicon carbide (SiC) semiconductors. This motor can enhance system efficiency by around 2-3 percent, which means the vehicle can be driven for approximately 5% longer on the same battery energy.
E-GMP relies on the rear wheel for propulsion. Customers will be able to choose between rear-wheel and all-wheel drive configurations; models with the latter can be equipped with an additional motor. The all-wheel drive system includes an EV transmission disconnector, which can control the connection between the additional motor and front wheels, and switch between two-wheel and all-wheel drive modes to enhance efficiency by offering the ideal level of power or performance for current driving conditions.
All vehicles developed with the E-GMP platform use a standardised single type of battery module. This module is composed of pouch-type standard cells and can be packed in different quantities as required for each vehicle.
Multi (800V and 400V) and Bi-Directional Charging System
Most existing EVs and the fast-charging infrastructure provide 50kW-150kW charging for EVs equipped with a 400V system; however, the development of 800V infrastructure, with up to 350kW charging, will gradually enable even more fast-charging.
In line with this trend, Hyundai Motor Group has invested in IONITY, Europe’s leading high-power charging network, as a strategic partner and shareholder. IONITY operates 308 high-power charging (HPC) stations - using a charging capacity of up to 350 kW - along highways in European countries. The company plans to increase this number to 400 HPC stations by 2022, including 51 currently under construction.
E-GMP offers 800V charging capability as standard and enables 400V charging, without the need for additional components or adapters. The multi-charging system is a world’s first patented technology which operates the motor and the inverter to boost 400V to 800V for stable charging compatibility.
A BEV based on E-GMP is capable of a maximum range of over 500km with a fully charged battery, according to the Worldwide Harmonised Light-duty vehicle Procedure (WLTP). Moreover, it can high-speed charge up to 80% in just 18 minutes and can add up to 100km of driving range in just five minutes.
Unlike previous BEVs, which only accept one-way charging, the E-GMP’s charging system is more flexible. The E-GMP’s newly developed Integrated Charging Control Unit (ICCU) represents an upgrade from existing On-Board Chargers (OBC), which typically only allow electricity to flow in a single direction from an external power source. The ICCU enables a new vehicle-to-load (V2L) function, which can additionally discharge energy from the vehicle battery without additional components. This enables BEV based on the E-GMP to operate other electric machinery (110 / 220V) anywhere. The system can even be used to charge another EV.
The new V2L function can supply up to 3.5kW of power and operate a mid-sized air conditioner unit and a 55-inch television for up to 24 hours.
E-GMP to underpin future EV sales growth worldwide
Hyundai Motor Group has put in considerable effort to prepare for the era of electrification. Kia Motors Corporation launched its first mass-produced BEV in 2011, the Ray EV, in Korea, with the Soul EV sold in global markets from 2014. The Group completed the introduction of a mass production system for all electrified vehicles in 2015, including those with HEV, PHEV, BEV, and FCEV.
The E-GMP will underpin Hyundai Motor Group’s plans to introduce a total of 23 BEV models including 11 dedicated BEV models, and sell more than 1 million BEVs worldwide by 2025. As part of its BEV vision, Hyundai Motor Company launched its dedicated ‘IONIQ’ BEV brand in August 2020, which includes three dedicated BEV models, the IONIQ 5, IONIQ 6 and IONIQ 7 by 2024. This currently covers various vehicle segments.
Kia is also undergoing a transformation for the era of electrification, based on its ‘Plan S’ mid-to-long term strategy. In September, Kia announced plans to increase the share of BEV sales volumes as a proportion of total sales to 20% by 2025. The company also recently published an early image of seven dedicated BEV models to be released sequentially by 2027.
